Janus banner IODP Janus database overview IODP Janus database search IODP Janus database Home

Hole Core Summary

ODP JanusWeb Request Form

  
Leg
Site
Hole
Display Totals? (checked = yes)
Display core types '0123456789GWIS' ?
Latitude to degrees (South -90 to 0; North 0 to 90)
Longitude to degrees (West -180 to 0; East 0 to 180)
  

About This Form

This form enables the retrieval of information about intervals cored and drilled as stored in ocean drilling database. The data were manually entered at the time of core recovery in the shipboard environment.

The result data displays cumulative and differential offsets for stratigraphy splices when alternate depth reporting schemes are selected in 'Report Options'.

Specify those fields on which you wish to limit the query. For example: to see information for one site, specify values for leg and site, leaving the remaining fields blank.

If the form is left blank, the entire dataset will be downloaded. This will take some time as > 50,000 cores have been logged. If this page does not meet your data request needs, please contact the Data Librarian.

Field Info

These additional core types will be reported if you wish. For typical depth series analyses they get in the way, so the default is to not report them.

Core types 0-9 (drilled intervals), G (ghost), W (wash) indicate drilling procedures performed which do not generate core material for analysis. Drilled intervals do deepen the hole and affect reported depths. Ghost and wash cores are the result of re-drilling a previous interval. Core types I (in-situ water sample) and S (side-wall sample) do not generate cored material in the traditional sense either, but do generate material for analysis at some specified depth.

These core types are not included in the accumulated statistics for core recovery.

Data Sample

This data sample was run with 'Display Totals?' checked, and the MCD depths enabled in 'Report Options'.

'Recovery' is calculated asbased on the sum of liner lengths for a given core. The recovery percentage is based on the driller's cored interval over liner length recovery.

Leg     Site    H       Cor     T       Top(mbsf)          Top(mcd)     Cum Offset      Diff Offset     Cored(m)       Cur(m) Rec(m) Rec(%) Time            Comment
202     1232    A         1     H            0.00            5.94             5.94             5.94          9.0         9.03   9.00  100.0 04/08/02 0530
202     1232    A         2     H            9.00                             6.09             0.15          9.5         0.00   0.00    0.0 04/08/02 0655     No Recovery.
202     1232    A         3     H           18.50           22.78             4.28            -1.81          8.5         9.84   9.82  115.5 04/08/02 0845    Tensor in @ 06:50 ADARA.
...
Hole Totals:    Length Cored      76.0  Length Recovered         76.42  Recovery        100.6

See Also

Please direct any questions, comments or suggestions to: Help Desk.

Last modified Friday, 12-Jan-07 12:30:23