Next Section | Table of Contents

Table T1. Expedition 307 operations plan and time estimates.
Site number
Location (lat., long.)
Seafloor depth (mbrf)
Operations description
Transit (days)
Drilling/coring (days)
Wireline logging (days)
Dublin, Ireland
Start of Expedition 307
(5 days)
In port


Transit ~300 nmi to Site PORC-04A @ 10.5 kt
28.6 h
1.2
PORC-4A (Belgica mound)
51.37588°N, 11.73003°W
965
Hole A: APC to refusal @ ~75 mbsf, XCB to 112 mbsf, 4 temp. meas.
1.1
Wireline log with triple combo & FMS-sonic (12.0 h)
0.5
Hole B: APC to refusal @ ~75 mbsf, XCB to 112 mbsf
0.5
Hole C: APC to refusal @ ~75 mbsf, XCB to 112 mbsf
0.6
Total days on site:
2.7
Transit ~0.5 nmi to Site PORC-03A @ 10.5 kt
0
PORC-3A (Belgica mound)
51.38080°N, 11.71846°W
826
Hole A: APC to refusal @ ~75 mbsf, XCB to 220 mbsf, 4 temp. meas.
1.5
Wireline log with triple combo/FMS-sonic/VSP (WST) (18.0 h)
0.7
Hole B: APC to refusal @ ~75 mbsf, XCB to 220 mbsf
1.0
Hole C: APC to refusal @ ~75 mbsf, XCB to 220 mbsf
1.1
Total days on site:
4.3
Transit ~7 nmi to Site PORC-02A @ 10.5 kt
0
PORC-2A (Belgica mound)
51.43601°N, 11.55033°W
423
Hole A: APC to refusal @ ~75 mbsf, XCB to 200 mbsf, 4 temp. meas.
1.2
Wireline log with triple combo & FMS-sonic (11.25 h)
0.5
Hole B: APC to refusal @ ~75 mbsf, XCB to 200 mbsf
1.0
Total days on site:
2.7
Transit ~1035 nmi to Ponta Delgado @ 10.5 kt
98.6 h
4.1
Ponta Delgada, Azores
Discharge Expedition 307 Science Party
(1 day)
In port
Transit ~3525 nmi to Mobile @ 10.5 kt
335.7 h
14.0
Mobile, Alabama (USA)
End of Expedition 307
19.3
8.0
1.7
Subtotal transit time:
19.3
Subtotal on site time:
9.7
Total operating days:
29.0
Total length of expedition including port call(s):
35.0

Notes: Seafloor depth is prospectus water depth plus 11.0 m adjustment from waterline to rig floor (i.e., drillers depth). Advanced piston corer (APC) refusal depths are arbitrary. APC coring will proceed as deep as possible if justified by core quality/quantity. Use of the extended core barrel (XCB) will be dependent upon results of APC coring. Temperature measurements for formation gradient will be used primarily for hydrocarbon safety control. FMS = Formation MicroScanner, VSP = vertical seismic profile, WST = water sampling temperature probe.

Next Section | Table of Contents