Skip to main content

IODP Expedition 401

Mediterranean–Atlantic Gateway Exchange


Daily science report for 31 January 2024

Location: Hole U1611B (36°19.3779′N, 4°34.7520′W; water depth 784.0 mbsl)

Science Update: We drilled ahead from 211.6 to 744.9 mbsf and pumped 30 bbl sepiolite mud sweeps after adding every two stands of pipe to keep the hole clear. When the center bit was retrieved, 1.7 m of sediment was found behind it in the core barrel, which was curated as a wash core, Core U1611B-2W. Coring started at 1830 h. Cores U1611B-3R to 4R penetrated from 744.9 to 764.3 mbsf and recovered 17.7 m (91%).

Cores U1611A-75R to 78R and 84R to 86R were split and described (Cores 79R to 83R were nearly empty). They are dark greenish gray Messinian silty muds and sandy silts with cm to dm scale beds of sand, dolomitic silty mud, and carbonate cemented beds.


Daily science report for 30 January 2024

Location:

  • Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)
  • Hole U1611B (36°19.3779′N, 4°34.7520′W; water depth 784.0 mbsl)

Science Update: Downhole logging continued in Hole U1611A. The triple combo tool string made a repeat and main pass, which together cover the interval from 672.7 to 909.6 mbsf. Borehole diameter varied between narrower than 6 inch to wider than the maximum extent of the caliper measurement, 17 inch, and the logged interval of the borehole was inclined from the vertical by between 10° and 15°. The tool string was back on deck at 0410 h and a sonic-inclinometry tool string was assembled for the second logging run. This tool string was lowered into the borehole but could not pass below 743.6 mbsf. It recorded data for the short interval up to the bit, was back on deck by 0910 h, and the logging equipment was disassembled by 1100 h. The BHA was raised back to the ship, clearing the rotary table at 1400 h and ending Hole U1611A. A new mechanical bit release (MBR) and PDC RCB bit were added to the BHA and were lowered below the ship. The ship was offset to the northwest and Hole U1611B was started at 1725 h at a water depth of 784 mbsl. By midnight we had drilled ahead to 211.6 mbsf, with the aim to drill ahead to 720 mbsf and then start coring the early Pliocene and Messinian target strata.

Cores U1611A-63R to 74R were split and described. They are dark greenish gray Messinian silty muds and sandy silts with cm to dm scale beds of sand, conglomerate, and cemented carbonate.


Daily science report for 29 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: The wiper trip continued during the morning with washing down from 765.2 mbsf. Twelve tight spots were encountered and 6 m of fill was found at the base of the hole. From 0730 to 1030 h we washed out the fill and swept the hole with 30 bbl sepiolite mud in preparation for coring. Cores U1611A-84R to 86R penetrated from 1262.5 to 1281.9 mbsf and recovered 13.2 m (68%). We stopped coring after Core 86R at 1545 h and started to prepare the hole for downhole logging. The bit was released at the base of the hole, it was displaced with barite-weighted mud, and the end of pipe was raised to 672.7 mbsf. The rig floor team assembled the triple combo logging tool string, without the source, and started lowering it down the pipe at 2145 h. The tool string reached an obstruction at 909.6 mbsf, and by midnight we started the upward logging pass.

Cores U1611A-51R to 62R were split and described. They are Messinian silty muds with cm to m scale beds of sand or conglomerate, and some dm scale carbonate cemented beds. Cores 51R and 52R are mostly very dark gray, and Cores 53R to 62R are dark greenish gray.


Daily science report for 28 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: Cores U1611A-73R to 83R penetrated from 1194.6 to 1262.5 mbsf and recovered 36.7 m (54%). We switched to full-length RCB core advances with Core 77R. Core 79R returned empty, so we ran the bit deplugger and switched back to half-length advances for Cores 80R to 83R, each of which recovered less than 10 cm. At 1945 h we started a wiper trip to clear bridges in the hole prior to further coring and downhole logging. Overpulls of 20,000 to 30,000 lb were observed at 1104.9, 949.4, 881.7, and 872.0 mbsf, and by midnight the bit had been raised to 620 mbsf.

Cores U1611A-41R to 50R were split and described. They are Messinian in age and are mainly composed of very dark gray silty mud and calcareous silty mud. Sand beds, slumps, and conglomerates are present on a cm to dm scale. Wood and fish fragments continue to be found.


Daily science report for 27 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: Cores U1611A-56R to 72R penetrated from 1112.2 to 1194.6 mbsf and recovered 71.5 m (87%). Today we continued with half-core (4.65 m) advances, to attempt better core recovery as compared to full-length cores. Four 30 bbl mud sweeps were run.

Cores U1611A-33R to 40R were split and described. They are Messinian in age and are mainly composed of very dark gray mud, silty mud, and calcareous silty mud. The sediments are typically laminated at an mm scale. Sand beds and slumps on a cm to dm scale are present. Wood and fish fragments continue to be found on bedding planes. Foraminifera are present in Core 35R and below.


Daily science report for 26 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: Cores U1611A-39R to 55R penetrated from 1000.6 to 1112.2 mbsf and recovered 86.7 m (78%). After Cores 44R, we switched to half-core advances to see if that would improve core recovery. During the day, full-core advances yielded 69% recovery and half-core advances yielded 87%. Five 30 bbl mud sweeps were made to flush cuttings and loose sediment out of the borehole.

Cores U1611A-28R to 32R were split and described (Cores 25R to 27R were nearly empty). They are Messinian in age and are dominated by greenish black calcareous silty mud. The sediments are typically laminated at a mm scale, with occasional beds of coarser sediments and slumps on a cm to dm scale. Wood and leaf fragments were found, along with fish teeth and scales. Foraminifera and nannofossils are mostly absent.


Daily science report for 25 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: Cores U1611A-25R to 38R penetrated from 879.4 to 1000.6 mbsf and recovered 59.0 m (49%). After Cores 25R and 26R returned nearly empty, we ran the bit deplugger. The low recovery was likely related to coarse-grained sediments in the formation. Five 30 bbl mud sweeps were made to flush cuttings and loose sediment out of the borehole.

Cores U1611A-16R to 24R were split and described. Their age is Early Pliocene to Messinian. Cores 16R to 21R are dark greenish gray calcareous silty mud. Cores 22R to 24R are primarily calcareous mud and also contain <40 cm thick conglomerate beds, silty sands, and some slumped intervals.


Daily science report for 24 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: Cores U1611A-13R to 24R penetrated from 763.0 to 879.4 mbsf and recovered 76.8 m (66%). We ran five 30 bbl mud sweeps during the day.

Cores U1611A-5R to 15R were split and described. They contain Early Pliocene dark greenish gray calcareous mud and calcareous silty mud. Cores 12R and 13R contain four <40 cm thick beds of conglomerate. Mud clasts, shell fragments, and dolomitic sandy silt also appear in some beds in this interval.


Daily science report for 23 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: During preparation for running the core line to deploy the Sediment Temperature 2 (SET2) tool and the RCB core barrel, the core line winch electrical controller failed, specifically the Veeder-Root counter in the unit. It was replaced and the winch was back online by 0545 h. The SET2 tool run gave a temperature of 28°C at 657.3 mbsf. The Icefield MI-5 core orientation tool, usually run to orient APC cores, was run by piggybacking on the SET2 tool deployment to try to estimate any deviation of the casing from vertical. Coring started at 0815 h, and after Core U1611A-2R recovered only 3 cm of sediment, we ran the bit deplugger. Recovery improved, and Cores U1611A-2R to 12R penetrated from 656.3 to 763.0 mbsf and recovered 87.7 m (82%).

Cores U1611A-3R to 5R were split and described. They contain Early Pliocene dark greenish gray calcareous mud and calcareous silty mud.


Daily science report for 22 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.1 mbsl)

Science Update: We continued to drill the casing into Hole U1611A until the reentry cone base landed on the seafloor at 810.1 mbsl with the bit at 654.6 mbsf. The subsea camera was deployed to observe the release of the casing, and at 0405 h the casing assembly was released from the pipe and BHA. The bit was raised back to the ship, clearing the rig floor at 1103 h, and completing the casing portion of operations at Hole U1611A. The rig floor team then assembled the RCB BHA with a PDC bit, lowered it to 584.9 mbsl, and deployed the subsea camera again to guide reentry into the hole. Hole U1611A was reentered at 1832 h, and the top of the cone was confirmed to be at 807.3 mbsl and the seafloor at 810.1 mbsl, within error of the PDR estimate of seafloor depth, 810.2 mbsl. The bit was lowered down the casing, meeting sediments in the casing at 613 mbsf. The top drive was installed and the bit washed down to 656.3 mbsf, followed by a 30 bbl mud sweep to clear out the casing.

The science party met for a presentation covering the operational and science objectives for Site U1611, and the noon–midnight shift scientists took a tour of the engine room.


Daily science report for 21 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.2 mbsl)

Science Update: The day was spent drilling the casing into Hole U1611A from 138.7 to 604.9 mbsf. Seven 30 bbl sepiolite mud sweeps were pumped to keep the hole clear of loose sediment.

The science party met for presentations about the initial results from Site U1385, and the midnight–noon shift scientists took a tour of the engine room.


Daily science report for 20 January 2024

Location: Hole U1611A (36°18.7537′N, 4°34.2717′W; water depth 810.2 mbsl)

Science Update: The rig floor team continued to assemble the casing for Site U1611 and hang it below the ship. From 0900 to 1200 h, they made up the BHA, including the bit, underreamer bit, and mud motor. The underreamer and mud motor were tested and found to operate well. The BHA and drill pipe were lowered down through the casing until the bit and underreamer extended below the casing by 3 m. The HRT running tool was attached to the casing and the funnel was welded on. The funnel was lowered through the moonpool at 1540 h, and the whole casing system was lowered down to 792.1 mbsl before installing the top drive. Hole U1611A was started at 1730 h, and by midnight the system was drilled ahead to 138.7 mbsf.

The science party met to discuss stratigraphic correlations between three completed expedition sites, Sites U1609, U1610, and U1385.


Daily science report for 19 January 2024

Location:

  • In transit to Site U1611 (proposed Site WAB-03A)
  • Site U1611 (36°18.723′N, 4°34.307′W; water depth 810.2 mbsl)

Science Update: Today the ship traveled through the Strait of Gibraltar into the Mediterranean Sea to reach Site U1611 (proposed Site WAB-03A). We arrived on site at 1315 h, having completed the remaining 155 nmi of the 333 nmi voyage from Site U1385 at 11.6 kt. We lowered the thrusters at 1324 h and switched to DP mode at 1338 h. The rig crew cut and slip the drilling line and picked up the drill collars until the wind became too high to work in the derrick. From 1745 h to 2015 h we waited for the wind to drop before resuming operations. The hydraulic release tool (HRT) running tool was assembled and the upper guide horn was set aside.

The science party met to synthesize results from Sites U1609 and U1610.


Daily science report for 18 January 2024

Location:

  • Hole U1385L (37°34.0197′N, 10°7.6367′W; water depth 2584.2 mbsl)
  • In transit to Site U1611 (proposed Site WAB-03A)

Science Update: By 0330 h, the wind and seas had calmed enough to resume operations. The BHA was raised, disassembled, and stowed. The thrusters were raised at 0720 h, and at 0736 h we started the transit, ending operations at Site U1385. By midnight we had traveled 178 nmi of the 333 nmi transit to Site U1611 (proposed Site WAB-03A) in the Alboran Basin of the Mediterranean Sea.

The science party met to synthesize results from Site U1610.


Daily science report for 17 January 2024

Location: Hole U1385L (37°34.0197′N, 10°7.6367′W; water depth 2584.2 mbsl)

Science Update: Today was spent WOW. At midmorning the average wind speed reached 35 kt, gusting to 65 kt; then it eased throughout the day.

Cores U1385L-7X and 8X were split and described. They contain Messinian calcareous clay and clayey calcareous ooze, alternating in color between greenish gray and light greenish gray on a 1 m scale. The science party met to synthesize results from Site U1609.


Daily science report for 16 January 2024

Location: Hole U1385L (37°34.0197′N, 10°7.6367′W; water depth 2584.2 mbsl)

Science Update: We continued to drill ahead in Hole U1385L from 312.6 to 376 mbsf and started coring at 0330 h. Cores U1385L-2X to 8X penetrated from 376.0 to 443.9 mbsf and recovered 58.4 m (86%). We stopped coring at 1645 h and began to pull the bit out of the hole before the forecasted high wind and wave conditions started. The bit cleared the seafloor at 1835 h, and at 2315 h it was held at 332 mbsl while the ship began waiting on weather (WOW). We prioritized collecting core from Hole U1385L knowing that it would mean WOW the next day.

Cores U1385K-19X to 21X and U1385L-2X to 6X were split and described. Cores U1385K-19X to 21X contain Tortonian calcareous clay, alternating in color between greenish gray and light greenish gray on a sub-meter scale. Cores U1385L-2X to 6X contain Messinian calcareous clay and clayey calcareous ooze, alternating in color between greenish gray and light greenish gray on a 1 m scale.


Daily science report for 15 January 2024

Location:

  • Hole U1385K (37°34.0099′N, 10°7.6370′W; water depth 2584.2 mbsl)
  • Hole U1385L (37°34.0197′N, 10°7.6367′W; water depth 2584.2 mbsl)

Science Update: Cores U1385K-16X to 21X penetrated from 494.3 to 552.5 mbsf and recovered 56.2 m (97%). Having reached the age target in Core 21X, we stopped coring and pulled up the pipe, clearing the seafloor at 1328 h and ending Hole U1385K. We offset the ship 20 m to the north, started Hole U1385L at 1455 h, and drilled ahead without coring to 312.6 mbsf.

The science party met for a remote presentation by one of the Expedition 397 (Iberian Margin) Co-Chief Scientists about the paleoceanographic record at Site U1385. Cores U1385K-11X to 18X were split and described. They contain calcareous clay and clayey calcareous ooze, alternating in color between greenish gray and light greenish gray on a 1 m scale. These cores are Messinian and Tortonian in age.


Daily science report for 14 January 2024

Location: Hole U1385K (37°34.0099′N, 10°7.6370′W; water depth 2584.2 mbsl)

Science Update: Cores U1385K-5X to 15X penetrated from 402.4 to 494.3 mbsf and recovered 70.7 m (77%). After Cores 5X and 6X returned nearly empty, we ran a bit deplugger to ensure that the bottom of the BHA was free from obstruction. Recovery then improved to 86% for Cores 7X to 15X.

Cores U1385K-2X and 7X to 10X were split and described. They contain Messinian calcareous clay, alternating in color between greenish gray and light greenish gray on a 1 m scale.


Daily science report for 13 January 2024

Location: Hole U1385K (37°34.0099′N, 10°7.6370′W; water depth 2584.2 mbsl)

Science Update: Hole U1385K was started at 0035 h and was drilled ahead, reaching 385.0 mbsf at 1615 h. The center bit was retrieved and we started coring. Cores U1385K-2X to 4X penetrated from 385.0 to 402.4 mbsf and recovered 0.9 m (5%).

The science party met for presentations about the initial results from Site U1610.


Daily science report for 12 January 2024

Location:

  • Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)
  • Site U1385 (preliminary: 37°34.0103′N, 10°7.6377′W; water depth 2584.5 mbsl)

Science Update: The downhole logging equipment was rigged down by 0045 h and the pipe was raised, clearing the seafloor at 0130 h and the rig floor at 0300 h. The rig floor was secured for transit, we raised the thrusters at 0336 h, and we started the sea passage to Site U1385 at 0348 h, ending Site U1610. The 154 nmi voyage took 12.8 h at a speed of 12 kt. On reaching Site U1385, we lowered the thrusters at 1622 h and switched to dynamic positioning (DP) mode at 1652 h. The advanced piston corer/extended core barrel (APC/XCB) BHA was assembled with a PDC bit and was lowered toward the seafloor. A pipe-cleaning “pig” was pumped down to clean the inside of the drill pipe. At midnight, the ship was positioned 20 m east of Hole U1385J, ready to start the new hole.

Site U1385 was cored to 151 mbsf on Expedition 339 in 2011 and to 400 mbsf on Expedition 397 in 2022. Our plan is to extend the Site U1385 record deeper than 400 mbsf and recover late Miocene sediments.

Cores U1609B-89R to 93R were split and described. They contain mostly dark greenish gray calcareous silty mud, with smaller amounts of clayey calcareous ooze, calcareous sandy silt, and calcareous silty sand. They are likely Messinian in age.


Daily science report for 11 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-98R to 100R penetrated from 1414.5 to 1438.7 mbsf and recovered 0.0 m (0%). Although the drilling rate indicated that we were drilling recoverable sediments and had passed below the hard lithified sediments that had been partly recovered in Core 95R, no sediments were recovered, so we stopped coring at 0515 h with Core 100R. We prepared for downhole logging by releasing the bit at the bottom of the hole, filling the hole with 354.3 bbl of heavy (10.5 lb/gal) barite mud, and raising the pipe. When the end of the pipe reached 779.4 mbsf, the drill pipe became stuck. After an overpull of 60,000 lb would not free the pipe, the circulating head was attached so that fluid could be pumped, and the top drive was picked up so that the pipe could be rotated. After several attempts, at 1215 h the pipe came free at 90,000 lb overpull and a pump pressure of 600 psi. The end of pipe was set at 516.6 mbsf for logging, 14.7 m below the casing shoe. At 1415 h we started to prepare the rig floor and assemble the quad combo tool string, including natural gamma radiation (NGR), density, resistivity, and sonic velocity tools. The tool string was lowered down the hole, passing out of the casing into open hole at 1640 h. At approximately 723 mbsf, the tool string encountered an obstruction and, after eight attempts, could not pass any further down the hole. This depth interval is likely the same one that closed in on the drill pipe earlier in the day. By midnight the quad combo tool string had been disassembled.

Cores U1609B-81R to 88R and Core 94R were split and described. They contain mostly dark greenish gray calcareous silty mud, with smaller amounts of clayey calcareous ooze, calcareous sandy silt, and calcareous silty sand. They are likely Messinian in age.


Daily science report for 10 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-87R to 97R penetrated from 1312.8 to 1414.5 mbsf and recovered 74.4 m (73%). We cleared cuttings and sediment from the hole with sepiolite mud sweeps following each core. After Core 95R retrieved just 15 cm (hard dolostone rock pieces) and Core 96R was empty, we ran the bit deplugger to remove any potential obstructing rock lodged in the bit. Core 97R was a half-length advance and was empty.

Cores U1609B-73R to 80R were split and described. They contain Messinian dark greenish gray calcareous mud, calcareous silty mud, calcareous sandy silt, calcareous silty sand, and calcareous sands.


Daily science report for 9 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-74R to 86R penetrated from 1186.7 to 1312.8 mbsf and recovered 107.4 m (85%). We cleared cuttings and sediment from the hole with with 30 bbl of sepiolite mud sweeps at 1196.0, 1206.0, 1215.0, 1225.0, 1235.0, 1245.0, 1254.0, 1264.0, 1274.0, 1283.0, 1293.0, 1303.0, and 1312.0 mbsf. Hard rock curation procedures were used for indurated sandstone in Core 75R.

Cores U1609B-65R to 72R were split and described. All are Messinian in age. Core 65R to Section 68R-4, and Section 70R-2 to Core 72R contain dark greenish gray mud, calcareous silty mud, calcareous sandy silt, calcareous silty sand, and calcareous sands. Section 68R-5 to Section 70R-2 are greenish gray and pale greenish gray sandstones.


Daily science report for 8 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-62R to 73R penetrated from 1070.3 to 1186.7 mbsf and recovered 73.2 m (63%). We cleared cuttings and sediment from the hole with with 30 bbl of sepiolite mud sweeps at 1080.0, 1099.0, 1118.8, 1138.0, 1147.0, 1167.0, 1177.0, and 1186.0 mbsf. Hard rock curation procedures were used for Cores 68R to 70R, which contained indurated sandstone.

Cores U1609B-54R to 64R were split and described. They contain Messinian dark greenish gray mud, calcareous silty mud, calcareous sandy silt, calcareous silty sand, and calcareous fine sand.


Daily science report for 7 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-50R to 61R penetrated from 953.9 mbsf to 1070.3 mbsf and recovered 107.0 m (92%). Headspace gas methane/ethane ratios from these cores are within the safe range. Core 50R marked the end of the depth range for the special headspace gas protocol, with no resultant issues. The procedure took approximately an extra 45 min per core across 23 cores.

Cores U1609B-47R to 53R were split and described. They contain Messinian dark greenish gray calcareous mud, calcareous silty mud, and calcareous sandy silt. These are coarser grain-size lithologies than the overlying units and represent a change in depositional environment, as also predicted from the seismic profiles across the site. The last interstitial water (IW) sample from Hole U1610A was taken from Core 61R at 1063.3 mbsf. With the sediment becoming more compact with depth, the water yield had dropped to the minimum volume required for water chemistry measurements. The IW chemistry profile from these samples will be one of the deepest that IODP has recovered.


Daily science report for 6 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-42R to 49R penetrated from 876.3 to 953.9 mbsf and recovered 63.5 m (82%). Headspace gas results from these cores are within the normal range. Sepiolite mud sweeps were pumped at 899.0, 915.0, and 944.0 mbsf.

Cores U1609B-40R to 46R were split and described. They contain dark greenish gray calcareous mud and greenish gray clayey calcareous ooze, probably of Late Miocene age.


Daily science report for 5 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Repairs to the top drive continued and were complete by 0215 h. The rig floor team then assembled the RCB bottom-hole assembly (BHA) with a new 9⅞ inch polycrystalline diamond compact (PDC) bit and lowered it to 533 mbsl, 23 m above seafloor. The subsea camera was deployed and the ship was positioned for reentry. The view of the cone was partly obscured by a school of fish, which had been attracted by the camera lights. After switching off the lights for a short time the fish dispersed, and Hole U1610A was reentered at 0548 h. The bit was lowered to 810 mbsf. The top drive was picked up and the bit washed down to 827.8 mbsf, the hole depth we reached yesterday. Cores U1610A-37R to 41R penetrated from 827.8 to 876.3 mbsf and recovered 25.2 m (52%). Headspace gas results from these cores are within the normal range.

Cores U1609B-37R to 39R were split and described. They contain predominantly calcareous mud and clayey calcareous ooze. The age of these cores is Early Pliocene or Late Miocene.


Daily science report for 4 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-34X to 36X penetrated from 805.6 to 827.8 mbsf and recovered 17.2 m (77%). Headspace gas results from these cores are within the normal range. At 0700 h there was a failure in the top drive brake system, causing the brake to engage and overheat. We stopped coring and pulled up Core 36X, which had advanced 3 m. The bit was raised to 793.5 mbsf, the top drive was racked to allow repair, and the bit was raised to 495.2 mbsf, just inside the casing. The first interval of top drive repair ran from 0945 to 1330 h. At this stage we decided to change the coring system from extended core barrel (XCB) to rotary core barrel (RCB) for the remainder of the hole. We raised the bit to the ship, clearing the seafloor at 1423 h and the rig floor at 1630 h. The rest of the day was spent repairing the top drive.

Cores U1609B-27X to 36X were split and described. They contain predominantly fine-grained calcareous mud and calcareous clay. The age of these cores is Early Pliocene.


Daily science report for 3 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-26X to 33X penetrated from 728.3 to 805.6 mbsf and recovered 70.0 m (91%). At Core 27X we started a more rigorous headspace gas sampling protocol for the depth interval 754 to 960 mbsf at this site, following the recommendation by the IODP Environmental Protection and Safety Panel (EPSP) and Texas A&M University Safety Panel to check that the headspace gas results from a core are in normal range before advancing the bit to collect the next core. This protocol is in effect because a detailed preexpedition analysis of 3-D seismic data showed that there is very low risk of finding gas at the Site U1610 location and we are being cautious.

Cores U1610A-18X to 26X were split and described. Cores 18X to 22X contain 4 m scale alternations between calcareous mud and calcareous silty mud, transitioning at ~700 mbsf to more homogeneous calcareous mud in Cores 23X to 26X.


Daily science report for 2 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-16X to 25X penetrated from 631.3 to 728.3 mbsf and recovered 98.5 m (102%). Cores U1609B-10X to 17X were split and described. They contain 3 m scale alternations between grayish olive calcareous mud and gray calcareous silty mud, of Early Pliocene age.


Daily science report for 1 January 2024

Location: Hole U1610A (36°41.9812′N, 7°25.8844′W; water depth 556.3 mbsl)

Science Update: Cores U1610A-5X to 15X penetrated from 538.5 to 631.3 mbsf and recovered 83.9 m (90%). Cores U1609B-3X to 9X were split and described. They contain 3 m scale alternations between grayish olive calcareous mud and gray calcareous silty mud, of Pliocene age.